Source photographs and explicitly labelled close-up crops are shown. Five gallery materials do not imply five camera angles. Accessories, model variations and the delivered configuration require confirmation.
D72
The D72 is listed for grinding and polishing concrete and stone floors with a 720mm working-width option. It is a larger floor machine, so access, loading arrangements and the tool sequence matter as much as the motor rating.
| Listed supply options | 380 V |
|---|---|
| Listed motor power | 15KW |
| Listed machine dimensions | 1350*800*1200mm |
| Listed weight | 390 kg |
| Water tank capacity | 80L |
| Grinding heads | 12pcs |
| Parameters to confirm | Send an enquiry to confirm: Delivered D72 nameplate, tooling sequence, wet/dry configuration and handling requirements. |
The D72 is listed for grinding and polishing concrete and stone floors with a 720mm working-width option. It is a larger floor machine, so access, loading arrangements and the tool sequence matter as much as the motor rating.
The source lists twelve heads and an 80L tank. Specify the substrate and required finish before choosing wet or dry tooling. Keep D72 separate from D720; similar published ratings do not establish interchangeable assemblies.
Send an enquiry to confirm: Delivered D72 nameplate, tooling sequence, wet/dry configuration and handling requirements.
The D72 is listed for grinding and polishing concrete and stone floors with a 720mm working-width option. It is a larger floor machine, so access, loading arrangements and the tool sequence matter as much as the motor rating.
Confirm supplied accessories, packing weight and dimensions, transit protection and delivery terms.
Send an enquiry to confirm: Delivered D72 nameplate, tooling sequence, wet/dry configuration and handling requirements.
They are separate source records. Confirm a nameplate and parts reference before treating them as equivalent.
Tool selection depends on the material and finish. Request the appropriate sequence for each substrate.
Actual supplied and packed dimensions, lifting points, weight and the unloading method.
The source lists the DS650 as a 650mm floor grinder for grinding, honing and polishing with suitable tooling. A variable-speed drive lets the operating setting be chosen for the stage rather than treating one speed as suitable for every abrasive.
View product →
The AL630 is a planetary floor grinder listed with a 630mm grinding diameter and twelve grinding blocks. It is used in floor preparation and polishing workflows with the diamond set chosen for the concrete or other confirmed surface.
View product →
The GT-630 is a wider planetary grinder for floor preparation and polishing. Its source-listed twelve-head arrangement and variable-speed drive let the tool set and operating setting be matched to successive stages of the job.
View product →