An electric grooving tool for construction wiring and plumbing preparation. The source lists 38 mm working width, 36 mm working depth, 2500 W and 220 V. Match the groove requirement to the actual blade arrangement, wall material and extraction setup; these entries do not establish dust-free operation or permission to cut structural reinforcement.
View product →
JH-65 mains-powered demolition breaker with listed 1520 W, 45 J and 30 mm hex holder. Check the voltage, chisel set and confirmed impact rate before ordering.
View product →
This gasoline breaker has twin handles and a lower tool holder for an impact accessory. The original photos show a handheld demolition tool, not a rotary well-drilling rig despite the broad source category.
View product →
The JH-100F photographs show a gasoline engine above a handheld impact body, with tool-holder and transport-packaging views. A chisel or driving accessory has to match the holder and the approved use of the delivered tool.
View product →
Y600 is the gasoline ring-saw option in this listing. Its original photograph shows an orange engine housing, surrounding handle, blade-drive assembly and water connections.
View product →
The 7425D listing shows an electric ring saw with a front handle, rear grip, water-deflection parts and guide rollers around the cutting assembly. It is intended for cuts in concrete walls and building materials.
View product →
7425D-2 electric ring saw with listed 410 mm tooling and 300 mm cutting depth. Confirm electrical requirements, material and the model-specific blade system.
View product →
The aluminium guide and powered carriage are shown separately from a saw. Original close-ups reveal the handwheel, motor mounting, connections and the carriage on the rail.
View product →
This listing is for the guide track and powered carriage, not a complete cutting saw. The original views show an aluminium rail, blue carriage housing, handwheel, drive motor and controller.
View product →