Source photographs and explicitly labelled close-up crops are shown. Five gallery materials do not imply five camera angles. Accessories, model variations and the delivered configuration require confirmation.
AL630
The AL630 is a planetary floor grinder listed with a 630mm grinding diameter and twelve grinding blocks. It is used in floor preparation and polishing workflows with the diamond set chosen for the concrete or other confirmed surface.
| Listed motor power (W) | 7500 |
|---|---|
| Listed machine dimensions | 1240*810*1260mm |
| Listed weight | 250 kg |
| Grinding disc diameter | 630mm |
| Grinding blocks | 12 |
| Water tank | 40L |
| Parameters to confirm | Send an enquiry to confirm: AL630 nameplate, electrical version, carrier dimensions, tool set and wet/dry equipment. |
The AL630 is a planetary floor grinder listed with a 630mm grinding diameter and twelve grinding blocks. It is used in floor preparation and polishing workflows with the diamond set chosen for the concrete or other confirmed surface.
The same source offers AL720 and AL730 options. This page concerns AL630: larger option widths must not be copied into its specification. Confirm the electrical version, tool carrier and dust or water arrangement for the machine being quoted.
Send an enquiry to confirm: AL630 nameplate, electrical version, carrier dimensions, tool set and wet/dry equipment.
The AL630 is a planetary floor grinder listed with a 630mm grinding diameter and twelve grinding blocks. It is used in floor preparation and polishing workflows with the diamond set chosen for the concrete or other confirmed surface.
Confirm supplied accessories, packing weight and dimensions, transit protection and delivery terms.
Send an enquiry to confirm: AL630 nameplate, electrical version, carrier dimensions, tool set and wet/dry equipment.
Those are source options, not the selected AL630 dimensions. Request a separate configuration sheet.
Bond and grit depend on the substrate and removal required. Send the floor details.
The source lists alternatives. Confirm the delivered motor, controls and supply requirements.
The source lists the DS650 as a 650mm floor grinder for grinding, honing and polishing with suitable tooling. A variable-speed drive lets the operating setting be chosen for the stage rather than treating one speed as suitable for every abrasive.
View product →
The GT-630 is a wider planetary grinder for floor preparation and polishing. Its source-listed twelve-head arrangement and variable-speed drive let the tool set and operating setting be matched to successive stages of the job.
View product →
The D72 is listed for grinding and polishing concrete and stone floors with a 720mm working-width option. It is a larger floor machine, so access, loading arrangements and the tool sequence matter as much as the motor rating.
View product →