Original photographs and labelled component panels. Installed machines, colours and workshop stock illustrate configurations; the quotation defines what is supplied.
DM-Series Walk-Behind Terrazzo Grinder
The source shows wheeled walk-behind grinders with a vertical motor above a low grinding head. They are guided from a handle while the selected diamond tooling works on the floor; this is not a small hand-carried angle grinder.
| Voltage options; exact motor to confirm | 380V |
|---|---|
| Source weight; unit retained if stated | 120 kg |
| Source motor power | 3KW |
| Source grinding-disc speed | 2880r/min |
| Working-width options | 250mm / 350mm |
| Parameters to confirm | Confirm missing parameters and delivery contents for the exact configuration. |
The source shows wheeled walk-behind grinders with a vertical motor above a low grinding head. They are guided from a handle while the selected diamond tooling works on the floor; this is not a small hand-carried angle grinder.
The source combines different DM sizes and working-width options. Select one motor and head size, then agree the tooling for terrazzo or the specified concrete surface. A motor or disc-speed field is not a guarantee of removal rate or final gloss.
Describe the substrate, coating and required result: cleaning, removing material or polishing. Agree the working head, tooling bond, speed and wet or dry arrangement. Surface examples are not universal compatibility tests.
Request the exact model plate, operating manual, parts references and itemised delivery list. Quoted accessories, consumables and configuration choices should be recorded separately; workshop stock does not define the delivered set.
Confirm missing parameters and delivery contents for the exact configuration.
The source shows wheeled walk-behind grinders with a vertical motor above a low grinding head. They are guided from a handle while the selected diamond tooling works on the floor; this is not a small hand-carried angle grinder.
Confirm supplied accessories, packing weight and dimensions, transit protection and delivery terms.
Confirm missing parameters and delivery contents for the exact configuration.
No. Select tooling for the actual surface and desired result.
No. Confirm the collection equipment and its documented performance for the work.
Describe the substrate, coating and required result: cleaning, removing material or polishing. Agree the working head, tooling bond, speed and wet or dry arrangement. Surface examples are not universal compatibility tests.
Identify the delivered model, component reference and measured mounting interface.
The source combines different DM sizes and working-width options. Select one motor and head size, then agree the tooling for terrazzo or the specified concrete surface. A motor or disc-speed field is not a guarantee of removal rate or final gloss.
State the model or part, measurements and quantity. Ask for equipment, accessories and documents to be itemised separately.
The DM250 is a walk-behind grinder with a vertical motor, wheeled frame and a guarded floor head. It is intended for floor preparation and finishing with tooling selected for the concrete or terrazzo surface.
View product →
The DMS250 has a handle-operated wheeled body and replaceable grinding-head arrangement. The source underside photograph is useful for discussing the tool mounting, rather than assuming that every abrasive in the catalogue is supplied.
View product →
The DM350 is a walk-behind floor grinder for controlled passes over a prepared working area. The original listing includes upright single-head machines and a comparison panel of other grinder types.
View product →