Original photographs and labelled component panels. Installed machines, colours and workshop stock illustrate configurations; the quotation defines what is supplied.
Floor Polishing Machine with Tool Options
The walk-behind machine has a low circular working head, long handle and a tank. The source shows brushes, pads and an abrasive mounting assembly; each setup performs a different cleaning or surface-finishing task.
| Source motor power, kW | 1.8 kW |
|---|---|
| Listed mass | 85 kg |
| Source voltage and frequency | 220V/50HZ |
| Power cord length | 12 m |
| Source ballast options; inclusion to confirm | 15kg * 2 pieces |
| Source head-speed field | 175r/min |
| Tank capacity; configuration to confirm | 15L |
| Parameters to confirm | Confirm missing parameters and delivery contents for the exact configuration. |
The walk-behind machine has a low circular working head, long handle and a tank. The source shows brushes, pads and an abrasive mounting assembly; each setup performs a different cleaning or surface-finishing task.
Confirm the selected pad or attachment and floor material rather than treating every pictured surface as approved. The source motor-power notation is inconsistent, and the quoted total weight needs clarification about the separately listed ballast blocks.
Describe the substrate, coating and required result: cleaning, removing material or polishing. Agree the working head, tooling bond, speed and wet or dry arrangement. Surface examples are not universal compatibility tests.
Request the exact model plate, operating manual, parts references and itemised delivery list. Quoted accessories, consumables and configuration choices should be recorded separately; workshop stock does not define the delivered set.
Confirm missing parameters and delivery contents for the exact configuration.
The walk-behind machine has a low circular working head, long handle and a tank. The source shows brushes, pads and an abrasive mounting assembly; each setup performs a different cleaning or surface-finishing task.
Confirm supplied accessories, packing weight and dimensions, transit protection and delivery terms.
Confirm missing parameters and delivery contents for the exact configuration.
No. Select tooling for the actual surface and desired result.
No. Confirm the collection equipment and its documented performance for the work.
Describe the substrate, coating and required result: cleaning, removing material or polishing. Agree the working head, tooling bond, speed and wet or dry arrangement. Surface examples are not universal compatibility tests.
Identify the delivered model, component reference and measured mounting interface.
Confirm the selected pad or attachment and floor material rather than treating every pictured surface as approved. The source motor-power notation is inconsistent, and the quoted total weight needs clarification about the separately listed ballast blocks.
State the model or part, measurements and quantity. Ask for equipment, accessories and documents to be itemised separately.
Hening Floor Polishing Machine — 1.8, 12m is intended for concrete floor preparation, grinding and finishing. Final power, voltage, tooling and packing are confirmed for the selected configuration and destination market.
View product →
The H8101 is a walk-behind scrubber with a front cleaning brush and a rear water-pickup assembly. Its separate clean- and dirty-water tanks make it a cleaning machine, not a concrete grinder or a machine for restoring stone with diamond tools.
View product →
Hening Floor Polishing Machine — 1.8, 2.5P is intended for concrete floor preparation, grinding and finishing. Final power, voltage, tooling and packing are confirmed for the selected configuration and destination market.
View product →