Original photographs and labelled component panels. Installed machines, colours and workshop stock illustrate configurations; the quotation defines what is supplied.
C-001 Portable Hydraulic Hole Puncher
The C-001 has a powered body and an open punching throat for a matched punch-and-die set. It makes holes in suitable metal workpieces; the tool opening and support arrangement decide how close the hole can be placed to an edge.
| Voltage options; exact motor to confirm | 220 V |
|---|---|
| Source overall dimensions; scope to confirm | 58.5*17.8*32cm |
| Source motor power, kW | 1.98 kW |
| Source mass, tonnes | 0.0135 t |
| Source hole-diameter range | 6.5-20.5mm |
| Listed material thickness; grade to confirm | 6mm |
| Throat depth | 40mm |
| Parameters to confirm | Confirm missing parameters and delivery contents for the exact configuration. |
The C-001 has a powered body and an open punching throat for a matched punch-and-die set. It makes holes in suitable metal workpieces; the tool opening and support arrangement decide how close the hole can be placed to an edge.
The source lists hole diameters, thickness and throat depth without a material-strength test condition. Confirm the workpiece grade and die set before treating those values as a capacity for every steel section. The weight field is expressed in tonnes and is retained as supplied.
Provide the steel grade, dimensions and required hole or cut. Agree the particular cutter model or punch-and-die set, support and access. A model suffix or nominal diameter alone is not a capacity for every steel grade.
Request the delivered model identification, operating manual, parts list and an itemised equipment schedule. Consumables, accessories and transport items shown separately must be confirmed in the quote rather than assumed included.
Confirm missing parameters and delivery contents for the exact configuration.
The C-001 has a powered body and an open punching throat for a matched punch-and-die set. It makes holes in suitable metal workpieces; the tool opening and support arrangement decide how close the hole can be placed to an edge.
Confirm supplied accessories, packing weight and dimensions, transit protection and delivery terms.
Confirm missing parameters and delivery contents for the exact configuration.
This listing describes cutting or punching, not a bending operation.
No. Confirm the steel strength and selected tooling with the supplier.
Provide the steel grade, dimensions and required hole or cut. Agree the particular cutter model or punch-and-die set, support and access. A model suffix or nominal diameter alone is not a capacity for every steel grade.
Use the delivered model and component identification together with photographs and measured mounting interfaces.
The source lists hole diameters, thickness and throat depth without a material-strength test condition. Confirm the workpiece grade and die set before treating those values as a capacity for every steel section. The weight field is expressed in tonnes and is retained as supplied.
State the model or part, measurements and quantity. Ask for equipment, accessories and documents to be itemised separately.
The original photographs show an electric drilling motor on a vertical stand with a feed handle and a separate diamond core bit. It removes a cylindrical core from suitable concrete; it is not a hydraulic metal hole puncher.
View product →