Original photographs and labelled component panels. Installed machines, colours and workshop stock illustrate configurations; the quotation defines what is supplied.
Compact Horizontal-Shaft Gasoline Engine
This air-cooled single-cylinder engine is shown with its output shaft, recoil-starter side and upper tank-and-filter arrangement. Match the complete mounting and drive interface when replacing an engine on a trowel, compactor or other machine.
| Engine cycle | 4-stroke |
|---|---|
| Cylinder arrangement | Single cylinder |
| Cooling arrangement | Air-Cooled |
| Source overall dimensions; scope to confirm | 306*363*335mm |
| Source weight; unit retained if stated | 15 |
| Source engine displacement | 163CC |
| Parameters to confirm | Confirm missing parameters and delivery contents for the exact configuration. |
This air-cooled single-cylinder engine is shown with its output shaft, recoil-starter side and upper tank-and-filter arrangement. Match the complete mounting and drive interface when replacing an engine on a trowel, compactor or other machine.
The source title and rated-power field differ, and a starting field says kick start while the photographs show a recoil housing. These unresolved labels are not used as confirmed features; request the exact engine identification and service documentation.
Measure shaft diameter, projection, keyway and mounting pattern on the old engine. Confirm governed speed, rotation and any reduction drive with the host-machine requirements. Similar housings do not prove interchangeability or original-brand provenance.
Request the delivered model identification, operating manual, parts list and an itemised equipment schedule. Consumables, accessories and transport items shown separately must be confirmed in the quote rather than assumed included.
Confirm missing parameters and delivery contents for the exact configuration.
This air-cooled single-cylinder engine is shown with its output shaft, recoil-starter side and upper tank-and-filter arrangement. Match the complete mounting and drive interface when replacing an engine on a trowel, compactor or other machine.
Confirm supplied accessories, packing weight and dimensions, transit protection and delivery terms.
Confirm missing parameters and delivery contents for the exact configuration.
The source photographs and mixed model labels do not establish that; request verified identification and provenance.
No. Match shaft, mounting, controls and drive arrangement as well as rating.
Measure shaft diameter, projection, keyway and mounting pattern on the old engine. Confirm governed speed, rotation and any reduction drive with the host-machine requirements. Similar housings do not prove interchangeability or original-brand provenance.
Use the delivered model and component identification together with photographs and measured mounting interfaces.
The source title and rated-power field differ, and a starting field says kick start while the photographs show a recoil housing. These unresolved labels are not used as confirmed features; request the exact engine identification and service documentation.
State the model or part, measurements and quantity. Ask for equipment, accessories and documents to be itemised separately.
The original pictures show a compact gasoline engine with a horizontal output shaft, fuel tank, air filter and exhaust. It is offered as a replacement drive unit; host-machine images are application examples rather than included equipment.
View product →
The original photographs show a complete open-frame generator with a control panel, sockets, alternator and engine. This product is not a bare replacement engine, despite the old catalogue label.
View product →