Source photographs and explicitly labelled close-up crops are shown. Five gallery materials do not imply five camera angles. Accessories, model variations and the delivered configuration require confirmation.
DMS250
The DMS250 is listed as a wet grinder for terrazzo and other confirmed floor surfaces. Its 250mm working diameter gives it a different role from a wide planetary machine: choose it for the area, access and finish required, not just a smaller motor rating.
| Listed supply options | 380 V |
|---|---|
| Listed motor power | 3KW |
| Listed machine dimensions | 720*440*880mm |
| Listed weight | 75 kg |
| Working diameter | 250mm |
| Listed rotation speed | 2800 RPM |
| Listed grinding blocks | 16 |
| Grinding method | Wet |
| Parameters to confirm | Send an enquiry to confirm: Grinding-block arrangement, water provision, substrate suitability, tool set and electrical version. |
The DMS250 is listed as a wet grinder for terrazzo and other confirmed floor surfaces. Its 250mm working diameter gives it a different role from a wide planetary machine: choose it for the area, access and finish required, not just a smaller motor rating.
The source specifies 380 V and 3KW. Confirm the grinding blocks and water arrangement for the delivered head. Published area-per-hour figures lack job conditions and are not a guaranteed production rate.
Send an enquiry to confirm: Grinding-block arrangement, water provision, substrate suitability, tool set and electrical version.
The DMS250 is listed as a wet grinder for terrazzo and other confirmed floor surfaces. Its 250mm working diameter gives it a different role from a wide planetary machine: choose it for the area, access and finish required, not just a smaller motor rating.
Confirm supplied accessories, packing weight and dimensions, transit protection and delivery terms.
Send an enquiry to confirm: Grinding-block arrangement, water provision, substrate suitability, tool set and electrical version.
The source identifies wet grinding. Obtain confirmation before specifying a dry workflow.
The source lists sixteen blocks, but the quotation must state the actual head and supplied tool set.
Send the aggregate, binder, condition and desired finish so suitable tooling can be selected.
The DM250 is a walk-behind grinder with a vertical motor, wheeled frame and a guarded floor head. It is intended for floor preparation and finishing with tooling selected for the concrete or terrazzo surface.
View product →
The DMS250 has a handle-operated wheeled body and replaceable grinding-head arrangement. The source underside photograph is useful for discussing the tool mounting, rather than assuming that every abrasive in the catalogue is supplied.
View product →
The source shows wheeled walk-behind grinders with a vertical motor above a low grinding head. They are guided from a handle while the selected diamond tooling works on the floor; this is not a small hand-carried angle grinder.
View product →