DMDS600
A compact power-trowel listing identified as DMDS600, with a 600 mm diameter and 45 kg source mass. The pictured primary configuration has an engine, while the source power-type field lists electric/diesel/gasoline alternatives. Agree one actual drive and tooling configuration; this page does not describe a hybrid machine.
| Listed power | 5.5 / 7.5 HP |
|---|---|
| Source mass; scope to confirm | 45 kg |
| Source overall dimensions | 650 × 650 × 550 mm |
| Listed tooling diameter | 600 mm |
| Source speed notation; see unit/scope notes | 70-150/3000rpm |
The generic drive alternatives and 5.5hp/7.5hp values are mixed source options. They do not define an electric motor rating, voltage or simultaneous engine outputs. Confirm the exact engine or motor, power unit, fuel/electrical supply and starting equipment. The listing’s electric/epoxy title wording alone does not establish the pictured drive or epoxy-polishing suitability.
The source lists 600 mm cutter diameter and 650 × 650 × 550 mm dimensions. Confirm the actual guard, tooling and handle position before assessing edge clearance or transport fit. Those dimensions are not an included pan specification or a guarantee of working against every wall. Identify the pan/blades and mounting from the selected machine drawing.
The 70–150/3000rpm blade-speed entry does not explicitly identify rotor versus engine values. Do not present 3000 rpm as blade speed. Concrete finishing descriptions also do not prove cured-floor grinding or epoxy polishing. State concrete condition, required surface and access constraints, then obtain the appropriate documented tooling and use limits.
Agree the engine, pan and blade references for the delivered machine, including the actual items supplied. Source pictures are not a packing list or a maintenance procedure. Request the applicable manual, replacement-part references, net/packed weights and transport dimensions. Do not infer a lubricant, tightening torque, blade life or certification from appearance.
Concrete condition and required finish; access/edges; engine and controls; pan/blade drawings and included tooling; net/packed mass; applicable documents; quantity and destination.
No multi-drive arrangement is established. Select the actual configuration.
No. Confirm the machine and tooling’s documented application separately.
The source does not assign the combined figures clearly. Require corrected speed information.
A walk-behind gasoline power trowel with manual-handle control as listed by the source. Its records give a 1000 mm diameter, 6.5/7.5 HP options and 65 kg mass. Confirm the exact engine, tooling and machine identification before comparing this record with other 1000 mm trowels.
View product →
Walk-behind gasoline trowel with a listed 1000 mm working diameter and 5.5/6.5 HP options. Match the pan, blades and engine to the concrete finishing work.
View product →
The recovered original photographs show a walk-behind gasoline trowel with a guarded circular blade assembly and long handle. Separate pans and blades illustrate finishing-tool choices; they are not all supplied with one base machine.
View product →