RBC-25
A combined machine for cutting reinforcement to length and bending it for construction fabrication. The source lists 6–25 mm bar diameters, 1.7 kW motor power and a 0–180° bending-angle range. Confirm the capacity for each operation, steel grade and tool setup before choosing the machine.
| Motor power | 1.7 kW |
|---|---|
| Listed voltage options | 220V/110V — Select the ordered electrical version; automatic dual-voltage operation is not established. |
| Listed bending angle | 0-180 ° |
| Source speed entry | 4 seconds/3.5 seconds — The two times are not explicitly assigned to operations in the attribute. They are not guaranteed production output. |
| Maximum source diameter | 25mm |
| Minimum source diameter | 6mm |
| Source weight entry | 167 kg — Confirm whether the quoted weight is net or gross. |
| Packing size, not machine dimensions | 560 * 515 * 985mm |
A combined machine can bring two fabrication steps into one equipment choice, but the capacity and tooling for those steps should be checked separately. Give the reinforcement schedule, common bar diameters and steel grade, then identify the bend shapes and cut lengths required. A maximum diameter in a listing does not prove that every material, bend radius and multi-bar arrangement is supported.
The listed 0–180° range describes an angle entry. The required mandrel diameter, rollers, support arrangement and minimum bend radius are not specified by that number. Agree tooling against the fabrication drawing and applicable reinforcement requirements. Do not substitute an attractive gallery diagram for an approved bending setup or operating instruction.
The source gives “4 seconds/3.5 seconds” without an explicit operation mapping in that attribute. Another source graphic labels cutting and bending separately; these entries are not silently merged into a tested production rate. Ask for a model-specific demonstration with the chosen bar grade and diameter. The 110 V/220 V entry is treated as supply options, not proof that one unit accepts both without configuration. Confirm frequency, plug and required circuit with the supplier.
The 560 × 515 × 985 mm source entry is packing size. It should not be used to plan an installation footprint or working clearance. Confirm machine dimensions, net/gross weight and lifting requirements separately. The source’s 167 kg weight is not independently classified here as net weight. Include mandrels, rollers, cutting blades, any foot controls and spare parts in the written supply list; only confirmed included items should appear in the order.
Steel grade and 6–25 mm diameter requirements; bend drawings and radii; cutting lengths; electrical version; included tooling; packing and destination.
No. The source identifies packing size; installation dimensions must be requested separately.
That is not established. Select and confirm the delivered electrical version.
Material-specific cutting and bending capacity requires confirmation. Generic material labels are not a verified capacity chart.
A combined rebar bending and cutting machine with source-listed 6–32 mm bar diameters and a 3 kW motor. It is a distinct equipment enquiry from RBC-25: confirm the RBC-32 capacity, tooling and electrical configuration rather than transferring another model’s detail-image labels.
View product →