AL600 Walk-Behind Double-Drum Vibratory Roller
AL600 double-drum roller with hydraulic travel. Listed 9 HP and 70 Hz data; confirm the engine, machine weight and drum dimensions for your configuration.
View product →
Photographs show source samples and configurations. Illustrations and fitted examples do not establish supplied accessories or compatibility.
D600-1
D600-1 Walk-Behind Double-Drum Vibratory Roller
D600-1 hydraulic-drive walk-behind roller with two drums. Review the listed 7 HP and 25 kN specifications, engine version and site access before ordering.
- Two drums, controlled from behind the machine
- Choose the supplied engine and check the route
Technical Specifications
| Listed engine power | 7 HP |
|---|---|
| Travel speed | 0–4 km/h |
| Vibration frequency | 70 Hz |
| Listed exciting force | 25 kN |
| Fuel tank | 6 L |
| Water tank | 30 L |
| Parameters to confirm | Send an enquiry to confirm: Delivered engine/fuel version; Net/packed weight; Separately verified drum width and diameter. |
Product Description
Two drums, controlled from behind the machine
The D600-1 is a walk-behind vibratory roller with hydraulic travel and two steel drums. It is used for compaction work on accessible paved or granular areas where an operator can guide the machine from the rear handle. It is not a concrete finishing trowel, and the roller designation alone does not establish suitability for a particular fill material.
Choose the supplied engine and check the route
The listing gives 7 HP, 70 Hz vibration and 25 kN exciting force. Diesel and gasoline appear as engine alternatives, so specify one delivered version. Send the access width, work material and transport arrangements with the enquiry. Drum width, drum diameter and net weight should be confirmed separately; the combined wheel-size entry is not a reliable clearance drawing.
Before ordering
Send an enquiry to confirm: Delivered engine/fuel version; Net/packed weight; Separately verified drum width and diameter.
Applications
The D600-1 is a walk-behind vibratory roller with hydraulic travel and two steel drums. It is used for compaction work on accessible paved or granular areas where an operator can guide the machine from the rear handle. It is not a concrete finishing trowel, and the roller designation alone does not establish suitability for a particular fill material.
Packaging & Shipping
Confirm supplied accessories, packing weight and dimensions, transit protection and delivery terms.
Configuration Options
Send an enquiry to confirm: Delivered engine/fuel version; Net/packed weight; Separately verified drum width and diameter.
Product FAQ
Is 25 kN the static line load?
No. This page uses 25 kN only as the listed exciting force. Static linear load requires its own correctly defined specification.
Does one machine use diesel and gasoline?
The source lists alternative engines, not a dual-fuel engine. The quotation must identify the selected engine and fuel.
Can I use the catalogue grade figure to approve a slope?
No. Site operating limits need the manual and a job-specific assessment. A catalogue grade entry is not a safe-slope approval.
Send an Inquiry for This Product
Related Products
D900 Ride-On Double-Drum Vibratory Roller
A ride-on double-drum vibratory roller with a seated operator arrangement. The listing specifies hydraulic dual drive, hydraulic vibration, electric starting and 13 HP power. It records 25 kN excitation, 65 Hz vibration and 0–8 km/h travel; these are source figures to be checked for the ordered configuration.
View product →
600C Walk-Behind Single-Drum Vibratory Roller
A walk-behind single-drum vibratory roller with an extended operating handle. The source lists 6 HP power, 18 kN excitation, 70 Hz vibration and 0–3 km/h travel. The image shows a single working drum and a small support-wheel arrangement; it is not a double-drum roller.
View product →