Product catalogue
Equipment for rebar processing, concrete and surface preparation, compaction, compact power and industrial floor cleaning.
A ride-on double-drum vibratory roller with a seated operator arrangement. The listing specifies hydraulic dual drive, hydraulic vibration, electric starting and 13 HP power. It records 25 kN excitation, 65 Hz vibration and 0–8 km/h travel; these are source figures to be checked for the ordered configuration.
View product →
A walk-behind single-drum vibratory roller with an extended operating handle. The source lists 6 HP power, 18 kN excitation, 70 Hz vibration and 0–3 km/h travel. The image shows a single working drum and a small support-wheel arrangement; it is not a double-drum roller.
View product →
An electric grooving tool for construction wiring and plumbing preparation. The source lists 38 mm working width, 36 mm working depth, 2500 W and 220 V. Match the groove requirement to the actual blade arrangement, wall material and extraction setup; these entries do not establish dust-free operation or permission to cut structural reinforcement.
View product →
The machine has a walk-behind frame, gasoline engine and spray-gun mounting near the pavement. It applies selected liquid marking paint; the photos do not show a ride-on operator platform or a thermoplastic melting kettle.
View product →
The compact tool has a powered round working head and double handles. The source set includes separate pad examples and workshop views; the selected pad and the applied material determine the finishing operation.
View product →
The original photographs show a powered handheld finishing disc with two handles, a switch and a light. It works on an already applied surface; it is not an automatic rail-guided machine that feeds mortar up an entire wall.
View product →
The GQ50 uses a motor-driven mechanical cutting head to shear a supported steel bar. Its wheeled body and guarded drive suit a fixed cutting station where the operator positions stock and removes the cut lengths.
View product →
The TP5-800 uses vertical guides to move a mortar-spreading head along a prepared wall. Site photographs show the head at different heights; wall preparation, material consistency and guide setup remain separate work steps.
View product →
The GQ45 is a floor-standing steel-bar cutter with a mechanical drive, cutting opening and transport wheels. Workshop photographs show guarded motor and transmission arrangements and different finish colours.
View product →